top of page

Restoration Service
Baking Soda Cleaning Service
Ultrasonic Cleaning Service

Restoration Service

Our restoration service no longer covers complete bikes however we can restore parts for you to simply put back on your bike.

Typical Restored Parts :-


Master Cylinders

Brake Callipers

Starter Motors



Bakingsoda Cleaning

We use baking soda blasted at high pressure to clean away dirt , rust and oxidisation. The fine baking soda leaves a smooth clean surface.

This process is safe on carbs, engine internals and delicate items.

Any baking soda left in fuel or oil galleries will just dissolve in the ultrasonic tank or by washing thoroughly in clean water after blasting.

Ultrasonic Cleaning

In an ultrasonic cleaner, the object to be cleaned is placed in a chamber containing a suitable ultrasound conducting fluid(an aqueous or organic solvent) depending on the application.In aqueous cleaners, the chemical added is a surfactant which breaks down the surface tension of the water base.An ultrasound generating transducer is built into the chamber or may be lowered into the fluid.It is electronically activated to produce ultrasonic waves in the fluid.The main mechanism of cleaning action is by energy released from the creation and collapse of microscopic cavitation bubbles which break up and lift off dirt and contaminants from the surface to be cleaned.


The higher the frequency, the smaller the nodes between the cavitation points which allows for more precise cleaning.The bubbles created can be as hot as 10,000 degrees and produce 50,000 lbs per square inch of pressure, but are so small that cleaning and removal of microscopic particles of dirt is the end result.

bottom of page